5 Signs Your Solar Panels Need Cleaning or a Checkup
By Tim McGann of Pristine Panels · Published: November 13, 2026
The Short Answer
Your solar panels usually tell you when something is wrong, if you know where to look. The five biggest warning signs are: lower production on sunny days, dirt or droppings you can see from the ground, an alert in your monitoring app or a red light on your inverter, a power bill creeping up for no clear reason, and birds or squirrels hanging around your panels. If you notice any of them, or it has been more than six months since your last cleaning, it’s time for a cleaning and a once over.
1. Your Production Is Down on Sunny Days
Your monitoring app is the best early warning system you have. Solar Mentor recommends checking it at least once a month. Compare clear, sunny days this month with similar days in the past.
Aurora Solar explains that a gradual decline in output on clear, sunny days is a sign of buildup on the panels, while a sudden drop usually points to something else, like a failed inverter, a wiring issue or a shaded string of panels. Either one is worth a look. A slow slide often means it’s time for a cleaning. A sudden drop means it’s time for a checkup.
2. You Can See Dirt, Pollen or Droppings From the Ground
You don’t need to climb on the roof to check your panels, and please don’t. Aurora Solar and Solar Mentor both suggest checking from the ground, and binoculars make it easy. Look for a yellow or gray film, leaves collecting along the bottom edge, or white spots from birds.
That buildup costs you power. According to Aurora Solar, routine dust causes roughly 1 to 5% output loss, and pollen has reduced panel performance by up to 15% during peak pollen season. Bird droppings are even worse for their size, because they block individual solar cells and can create hot spots. A research poster from the National Renewable Energy Laboratory notes that birds, leaves and debris cause partial shading and hot spots, and that just one can cost about a third of a panel’s production.
And don’t count on the rain to fix it. An NREL led study found that rain alone is not enough to wash tree pollen off solar panels, which matters a lot here in Augusta, where pollen season hits hard every spring.
3. Your App Shows an Alert or Your Inverter Shows a Red Light
Your system is built to tell you when it needs attention. On a SolarEdge inverter, a green light means the system is producing, a blue light means it is talking to the monitoring platform, and a red light means a system error. In the Enphase app, a “Microinverters Not Reporting” alert means one or more microinverters are not communicating with the gateway.
An alert doesn’t always mean something is broken, but it should never be ignored. A system that isn’t reporting can’t tell you whether it’s producing, and a problem left alone can cost you weeks or months of power.
4. Your Power Bill Is Creeping Up for No Clear Reason
If your habits haven’t changed but your bill from Georgia Power, Jefferson EMC or Dominion Energy South Carolina keeps climbing, your panels may be making less power than they used to. Every kilowatt hour your panels don’t produce is one you buy from the utility instead.
Before you assume it’s rates or the weather, pull up your monitoring app and compare this year’s production to the same months last year. If production is down, a cleaning and checkup is the first place to start.
Noticed One of These Signs?
We’ll clean your panels and take a close look at what’s going on. Professional cleaning runs $250 to $500, depending on whether your home is one or two stories and how many panels you have.
Request Your Free Cleaning Quote5. Birds or Squirrels Are Hanging Around Your Panels
The space under your panels is warm, dry and sheltered, which makes it a favorite spot for animals, especially as the weather cools. Solar Mentor notes that pigeons and starlings are known for packing the underside of solar arrays with nests, and that large nests can choke off the ventilation gap that keeps panels cool.
Squirrels and rats are an even bigger concern. According to Solar Mentor, they pose the most immediate threat to your system’s electrical integrity because they chew wiring, and exposed wiring touching the metal racking can cause a short circuit. A sudden, unexplained drop in output from individual panels can be a sign of a chewed wire.
Watch for birds flying in and out from under the panels, nesting material poking out along the edges, droppings piling up on the roof or panels, or squirrels running across the array. If we spot nests or damage during a cleaning, we’ll point it out and explain your options.
Bonus Sign: It’s Been More Than Six Months
Even if you don’t notice any of the signs above, buildup happens slowly. We recommend cleaning twice a year: once in late spring after pollen season, and again in late summer or fall after leaves, dust and storms. If your last cleaning was before pollen season, your panels are due.
What Happens During a Pristine Panels Cleaning
We clean your panels safely and carefully, removing pollen, dust, droppings and debris so your system can make the power it was built to make. While we’re on the roof, we keep an eye out for the things you can’t see from the ground, like nesting, debris trapped under the panels, or wiring that doesn’t look right, and we let you know what we find. We serve Augusta, Evans, Martinez, Grovetown, North Augusta, Aiken and the surrounding area.
Frequently Asked Questions
How do I know if my solar panels need cleaning?
Watch for a gradual drop in production on clear, sunny days, buildup you can see from the ground, or a power bill that keeps climbing. We recommend cleaning twice a year, in late spring after pollen season and again in late summer or fall.
How much power do dirty solar panels lose?
According to Aurora Solar, routine dust causes roughly 1 to 5% output loss, and pollen has reduced performance by up to 15% during peak pollen season. Bird droppings and leaves can cause hot spots, and NREL notes that just one can cost about a third of a panel’s production.
What does a red light on my solar inverter mean?
On a SolarEdge inverter, a red light means a system error. A green light means the system is producing and a blue light means it is communicating with monitoring. If you see a red light or an alert in your app, call your installer or a solar service company to check it.
Can squirrels damage solar panels?
Yes. Squirrels and rats can chew the wiring under your panels, and exposed wiring touching the metal racking can cause a short circuit. Birds can also build nests under panels that block airflow. If you see animals around your array, have it checked.
How much does solar panel cleaning cost in Augusta?
Pristine Panels charges $250 to $500, depending on whether your home is one or two stories and how many panels you have. Call (762) 320 9290 or request a free quote online.
Don’t Wait for a Small Problem to Get Bigger
Your panels are working every day the sun is out. A little attention twice a year keeps them working at full strength for decades. If you’ve noticed any of these signs, call Tim at (762) 320 9290 or request your free cleaning quote online.
Schedule Your Panel CleaningSources
- Aurora Solar: Do You Actually Need to Clean Your Solar Panels? (July 2026)
- National Renewable Energy Laboratory: Photovoltaic Module R&D Considerations for Soiling Mitigation (research poster, June 2022)
- pv magazine USA: Rain insufficient for removing tree pollen from solar panels (NREL led study, January 2024)
- Solar Mentor: Critter Guards 101: Preventing Squirrel and Bird Damage to Your Solar Wiring (June 2026)
- SolarEdge: Inverter Status and System Performance Indications (LED meanings)
- Enphase: Homeowner Updates, Tips and Critical System Info (Microinverters Not Reporting alert)
- U.S. Department of Energy: End of Life Management for Solar Photovoltaics (panel lifespans)
Sources on this page were checked in November 2026. Equipment alerts and indicator lights vary by manufacturer and model, so check your system’s manual or call us if you are unsure.